• Uses F.T.D.I.’s VNC1L embedded USB host controller I.C. device.
• Two vertically mounted USB ‘A’ type socket to interface with USB peripheral devices
• Jumper selectable UART, parallel FIFO, or SPI MCU interfaces.
• Single 5V supply input.
• Auxiliary 3.3 V / 200 mA power output to external logic.
• Power and traffic indicator LED’s.
• Program or update firmware via USB Flash disk or via UART interface.
• VNC1L firmware programming control pins PROG# and RESET# brought out onto jumper interface
• VDIP2 is a Pb-free, RoHS complaint development module.
• VDIP2 module is supplied by Vinculum Firmware
Untuk informasi lebih lanjut, lihat penjelasan produk ini di data sheet. |
|